Day 3- DVL Engineering Summit, Wilmington, DE

by Marissa Donatone on 4/22/15 9:03 AM

Another great day at the DVL Engineering Summit. Mechanical are here getting the latest inforamation on Data Center Economizers and Energy Standards. Electrical Engineers are learning about Electrical codes and standards for Data Centers. 

We are concluding our Engineering Summit tour at Le Meridien Hotel in Philadelphia on Friday, April 24th. We are excited to see you there! 

 

Wilmington_DVL_Engineering_Summit

Read More

Topics: Emerson Network Power, Data Center, data center energy, Green Technology, DC Power, 7x24 exchange, Thermal Management, Mechanical Engineering, Electrical Engineering, DVL Engineering Summit, AHRI

Day 2- DVL Engineering Summit

by Marissa Donatone on 4/21/15 9:37 AM

Thank you to our Electrical and Mechanical Engineers for coming today to Day two of the DVL Engineering Summit in West Conshohocken!

We are excited to see everyone for Day 3 tomorrow in Wilmington, DE. Tomorrow's address: Hilton Wilmington/Christiana, 100 Continental Drive, Newark, DE

WestConshEngineering_Summit

Read More

Topics: DC Power, Thermal Management, cooling, Mechanical Engineering, Electrical Engineering, Codes and Standards, DVL Engineering Summit, AHRI

ECO-Friendly Choice in Single Phase UPS

by Miguel Rascon on 3/26/15 2:46 PM

ECOblog

“Environmental protection”, “high efficiency” and “energy savings” are topics of very high concern for both large corporations, as well as for individuals since these aspects are part of everyday life and may generate significant cost savings in both cases.

This is also valid for UPS ranging from large ones protecting substantially vast datacenters, to small ones with just a few kilowatts that safeguard a network or single cabinet in more modest settings.

The ECO mode – also known as energy saving mode or high efficiency mode depending on the UPS manufacturer – is currently highly discussed within the industry. The debate primarily focuses on on-line UPS and on large UPS. Nevertheless, energy savings and efficiency are extremely important aspects also in small and micro power UPS (typically from 500 VA to 10 kVA). The reasons are the same as for large power systems: savings on energy costs and lower environmental footprint.

Choosing a UPS in the most proper way, means considering the criticality of the application that needs to be protected, as well as evaluating the energy used by the UPS to protect the load against disturbances and interruptions.

Here I would like to highlight the “inherent ECO mode” that can be found in line interactive UPS products (VI or Voltage Independent according to EN 62040-3).

In this type of line interactive UPS (VI), the power stream flows from the input through several protection devices (overcurrent, overvoltage, etc.) and mainly through an Automatic Voltage Regulation (AVR) transformer.

The AVR is in charge of providing output voltage regulation, in order to minimize voltage variations in AC supply and ensure a regulated voltage according to the load tolerances.

Because of the high efficiency of the AVR (typically around 98% or 99%) and of the protection devices through which energy flows, as well as the lower quantity of electronic components used in this type of UPS topology, a high performance line interactive UPS can provide an efficiency level higher than 96% at full load. A perfect example of this is Liebert PSI UPS, which makes use of line interactive technology and therefore of AVR, and which can reach the efficiency levels mentioned above. As said, this operation mode is inherent to line interactive UPS topology, and its high efficiency is also ensured in wide load operating conditions and AC mains variation. While ECO mode in on-line UPS is operating in a smaller input voltage range, line interactive topology is able to operate in high efficiency mode during most input voltage changes while still being capable to provide some output regulation.

When comparing a line interactive UPS with a double conversion online UPS there are many aspects to be taken into consideration such as stepwise or pure sine wave inverter, transfer time, size, etc. However one of the main differences is exactly that line interactive UPS feature “inherent high efficiency” because of the VI technology and the use of AVR as mentioned earlier.

The energy savings associated to it are highly appreciated even if we are talking about single phase UPS meaning UPS which range from 0 to 10 kVA, because:

1. Daily saving  just  a  few  watts  in  continuous UPS operation 365 days a year amounts to a significant total yearly saving

2. In applications such as campuses or big corporations where many of these small UPS devices are used contemporarily, the few watts saved daily per each device increase even more the daily and yearly total saving and reduce the total campus or corporation expenditure.

To provide an example, assume a load of 2.5 kW being protected by a UPS. Such load may correspond to a cabinet with several servers for enterprise applications or to a wiring closet distribution panel. Such UPS can work in line interactive mode (assuming 97% efficiency) or operate in double conversion mode with 90% efficiency, using a rough estimation. The difference in power losses and thus energy savings, will be around 200 W. Assuming an electricity cost of 0.138 €/KWh and doing a quick calculation on yearly savings, you can get a value of around 272 € saved per year. This amount can be multiplied for five years and the total saving will reach nearly 1,500 €.

So it will be clear by now that additional to traditional ECO mode (typically used in double conversion online UPS in general and large UPS in particular) there is an inherent ECO mode used in single phase UPS, specifically line interactive ones.

This grants significant savings to customers as the line interactive technology is inherently highly efficient and as the UPS making use of it are typically used daily all year long so in the long term even little daily saving amounts to a considerable total figure.

And what about ECO modes in on-line UPS in this small UPS range? Is there any difference or advantage? There is an interesting story too.

Interested in reading more blogs by Emerson Network Power? FOLLOW THIS LINK.

Read More

Topics: Data Center, Green IT, data center design, data center infrastructure management, UPS, Thermal Management, DCIM, Uptime, monitoring, the green grid, energy efficiency

Speed, Flexibility and the Data Center

by Emerson Network Power on 11/25/14 11:45 AM

Kollengode Anand | November 20, 2014 | Emerson Network Power

iStock_000019241308Small

It’s no longer enough to be dependable if you’re running a data center.  With greater demands being placed by customers, both external and internal, data center administrators are required to be both dependable and fast. Consider these facts, from our “State of the Data Center” report last year:

  • The equivalent of one of every nine persons on the planet uses Facebook.
  • We generated 1.6 trillion gigabytes of data last year. That’s enough data to give every single person on Earth eight 32-gigabyte iPhones, and it’s an increase of 60 percent in just two years.
  • Every hour, enough information is created to fill more than 46 million DVDs.
  • Global e-Commerce spending topped $1.25 trillion in 2013.

It’s always been important to respond to your customers, of course, but now there are more of them, demanding more information, and more quickly:  the report says that if the online video they are watching buffers for more than five seconds, 25 percent of viewers drop off.  And if the video buffers for more than 10 seconds, half of them are gone.

Oh, and did we mention that the average cost of a data center outage now runs more than $900,000…an increase of one-third in just two years?

Which is why it’s critical for administrators to be able to flexibly configure their data centers, and to be able to react rapidly when requirements change, or when there’s a problem.  We’ve found that a unified approach to the entire infrastructure is the best way of handling these situations.  Whether it’s heating and cooling, power, servers, software, or more, the ability to administer data center operations in a real-time manner has become more imperative than ever.

It’s one of the key elements in the development of the dynamic data center, and in being able to easily manage changes and maintain an optimal environment.

We’ll be at the Gartner Data Center, Infrastructure & Operations Management Conference in Las Vegas in a couple of weeks, at booth #211, showing off the equipment and software that we’ve developed to help you make your business as dynamic as your data center.  We’ll also be speaking about where our clients believe the data center is headed more than ten years from now.   Their input has proven critical in the past, and their thinking is helping us develop the solutions that will solve their challenges both today and tomorrow.

For More Blogs by Emerson Network Power- Click Here

Read More

Topics: Emerson Network Power, Data Center, cloud computing, 7x24 exchange, Thermal Management, DCIM, Uptime, sustainability, clean energy, monitoring, Trellis

When Should You Consider Building a New Data Center? Case Study: Paragon Internet Group

by Emerson Network Power on 11/19/14 9:25 AM

man-in-a-server-room_MG_4163

IT departments today are all about speed – adding more applications faster to satisfy voracious global appetites for mobile, social media, streaming video and other resource-intensive applications. These applications must be available, regardless of their impact on critical infrastructure performance. If growth is stretching your resources too thin, you must take action to ensure availability. But because IT organizations are pressured to lower costs, you have to build an unassailable business case when deciding how to expand.

A variety of solutions are available for upgrading and expanding your critical infrastructure, including building a new data center, but how do you know which option is best?

Because you can take many actions short of building a new data center to improve your critical infrastructure, you may want to consider building new only as a last resort.
Building new is expensive and difficult. Factors such as getting a loan, finding a location and determining if you can get fiber optic cable all come into play. It can take three years before the new space is operational, and managing logistics for a move is challenging.

Still, there are times when building new is a good choice:

  • Your business growth is through acquisition, and you need to consolidate a number of acquired data center You may have to build new to accommodate them.
  • You don’t have a disaster recovery site. You can build new and use the old facility for this purpose.
  • Your equipment is so old and poorly maintained that it’s not worth it to upgrade. Building new is an opportunity to take advantage of new, more efficient technologies.

 

Here is an interesting case study about Paragon Internet Group in the UK.

What about you? Have you assessed and optimized your existing critical infrastructure or have you preferred to invest in a new data center project?

Author: Paul Russell, Emerson Network Power. 
To view more Blogs by ENP, CLICK HERE

Read More

Topics: Emerson Network Power, Data Center, cloud computing, Efficiency, Energy Logic, Thermal Management, DCIM, capacity

Subscribe to Our Blog

Recent Posts

Posts by Tag

see all